Utmost Safety When It Comes To Carpet Cleaning With The...

Mould loves warm, moist conditions, and it spreads very quickly via airborne spores, so it can be very difficult to eradicate from your home. Often the root cause is a leak or excess humidity.

To prevent mouldy floors and carpets you should try to perform the following. By either removing the carpeting entirely or using a carpet cleaning product that removes mold and prevents it from growing back your solution will assure you no more mold in the future.

How to Remove Mould from Carpets

Mould is very damaging to carpets, as it eats away the fibres and is very hard to dislodge. If your fitted carpet has been wet for longer than a couple of days – from a flood, for example – or if the affected area affected is larger than 2 square metres, you should consult a carpet cleaning professional. Always fix the causes of mould (e.g. a leaky pipe or broken window) before you attempt to deal with any stains – otherwise, the problems will just reoccur.

1.Put on protective clothing, goggles, and a facemask – attempting to remove the mould will disperse the spores and these could be damaging to your health if you breathe them in.

2.Be aware of ventilation concerns – make sure doors are closed to prevent mould spores from entering the rest of the house, but keep the windows open to encourage air flow.

3.If the carpet is removable, take it outside and leave it in bright sunlight to dry out for 48 hours. If it is fitted, turn on the overhead lights, pull up the carpet up from the floor approximately 50 cms more than the affected area; remove any soaked padding or lining; and dry the carpet out by using a fan, humidifier, or the blow function on a vacuum.

4.Next, take a stiff brush and sweep as much mould debris from the front and the back of the carpet. Also go over the area where the carpet was situated. Then vacuum or steam-clean all areas.

5.Next, apply anti-mould spray to the carpet. Follow the instructions on the label. You could also use one of the alternative cleaning products listed below. Make sure the mould spray soaks to the root of the fibres and that you apply it on both sides of your carpet.

6.Scrub the carpet on both sides and leave to dry. Most anti-mould treatment should not be rinsed out.

7.Apply an anti-fungal solution to the floor where the carpet was situated and leave to dry out.

8.Re-apply the mould spray on all areas and let it dry out again.

9.Continue to run a dehumidifier in the room for a couple more days to get rid of any residual spores.

10.Be sure to douse all equipment used in anti-fungal solution immediately to prevent the spores from escaping into other areas of the house

Refer or be guided by professional Carpet Cleaning Auckland for reliable assistance

Article Keywords: ,

Related Articles

Smart Trick To Eliminate Dark Portion In Doors And Walls During Carpet Cleaning

Published 12.06.2016 by Graemes in CategoryRug & Carpet Cleaning

Is your carpet appearing to turn gray or black along the edges of your room? Do you have black lines forming on your carpet along the walls, under doors, around air vents, or along the edges of your stairs? You likely have a problem known as filtration soiling occurring. If you have noticed your carpet […]

What Is The Most Practical Carpet Cleaning Approach To Traffic Graying Concern

Published 12.06.2016 by Graemes in CategoryRug & Carpet Cleaning

Because carpet stains can occur from a variety of sources, it’s important to determine the cause of the stains. There are two classifications of stains – from wear and from chemicals. Stains that occur from normal use and wear can be treated and minimized while stains that occur from chemicals are usually permanent. By identifying the […]

Working Out Carpet Cleaning For Wicking Problem Faster And Better

Published 12.06.2016 by Graemes in CategoryRug & Carpet Cleaning

As carpet cleaners we’re called upon to clean carpet fiber – the fuzzy stuff up top. But we also need to consider what lies underneath the fuzzy stuff. If the spill has already dried when you get to it, thoroughly vacuum to pull up as much dry material as possible. Then precondition, allowing a proper […]

Useful Carpet Cleaning Add Up Measures To Minimize Soil Damage

Published 12.06.2016 by Graemes in CategoryRug & Carpet Cleaning

The most difficult soils to remove are oils, tar, resin, and gum.  Those items are sticky and tend to bond, cure or dry on the fiber which cannot be removed by dry vacuuming.  These soils are the ones that require sufficient moisture, chemicals, and agitation to loosen and remove completely.  Also difficult to remove are […]

The Truth Behind Success Of Carpet Cleaning Concerning Brown Stain Formation

Published 12.06.2016 by Graemes in CategoryRug & Carpet Cleaning

Browning occurs on the tips of carpet tufts or on upholstery fabric. This will be more noticeable on light colored fabrics. Browning can be caused by many factors. Sometimes it can be removed; sometimes not. Learn the proper way of dealing with this concern to succeed very well. True browning (sometimes confused with wicking or […]

How To Carry Out Carpet Cleaning Of Dried Up Paints Fast And Effective

Published 12.06.2016 by Graemes in CategoryRug & Carpet Cleaning

The best time to remove paint from carpet is while it is still wet, but there are often times when you may not be able to get to it while it is in that state. To give an idea, You can likely remove all or most of the dried paint if it is latex paint, […]

What Is A Carpet Cleaning Procedure That Is Antibacterial In Its Approach

Published 12.06.2016 by Graemes in CategoryRug & Carpet Cleaning

There is no doubt that it can be quite difficult to keep a house clean and free from bacteria. In fact, a carpet can be one of the most difficult things to keep clean.To achieve a clean carpet that’s free of germs and bacteria, you’ll need to have it cleaned by a professional on a […]

Leave a Reply

Follow Me

Social Media Auto Publish Powered By : XYZScripts.com